Welding, soldering and brazing are the metal joining process. Each type of joining process has its own significance. Type of joining process to be applied for joining two parts depends on many factors. Below tabular comparison tells us the differences between the joining processes welding, soldering and brazing in aspects like strength comparison, temperature requirement, change in properties after joining, cost involved, heat treatment, preheating, etc.
|1||Welding joints are strongest joints used to bear the load. Strength of the welded portion of joint is usually more than the strength of base metal.||Soldering joints are weakest joints out of three. Not meant to bear the load. Use to make electrical contacts generally.||Brazing joints are weaker than welding joints but stronger than soldering joints. This can be used to bear the load up to some extent.|
|2||Temperature required is 3800°C in welding joints.||Temperature requirement is up to 450°C in soldering joints.||Temperature may go to 600°C in brazing joints.|
|3||To join work pieces need to be heated till their melting point.||Heating of the work pieces is not required.||Work pieces are heated but below their melting point.|
|4||Mechanical properties of base metal may change at the joint due to heating and cooling.||No change in mechanical properties after joining.||May change in mechanical properties of joint but it is almost negligible.|
|5||Heat cost is involved and high skill level is required.||Cost involved and skill requirements are very low.||Cost involved and sill required are in between other two.|
|6||Heat treatment is generally required to eliminate undesirable effects of welding.||No heat treatment is required.||No heat treatment is required after brazing.|
|7||No preheating of workpiece is required before welding as it is carried out at high temperature.||Preheating of workpieces before soldering is good for making good quality joint.||Preheating is desirable to make strong joint as brazing is carried out at relatively low temperature.|