Heat is a form of energy which transfers between bodies which are kept under thermal interactions. When a temperature difference occurs between two bodies or a body with its surroundings, heat transfer occurs.

Heat transfer occurs in three modes. Three modes of heat transfer are described below.

**Conduction:**

In Conduction, heat transfer takes place due to a temperature difference in a body or between bodies in thermal contact, without mixing of mass. The rate of heat transfer through conduction is governed by the Fourier’s law of heat conduction.

**Q = -kA(dT/dx)**

‘K’ is the thermal conductivity of body material

‘A’ is the cross-sectional area normal to direction of heat flow and

‘dT/dx’ is the temperature gradient of the section.

**Convection:**

In convection, heat is transferred to a moving fluid at the surface over which it flows by combined molecular diffusion and bulk flow. Convection involves conduction and fluid flow. The rate of convective heat transfer is governed by the *Newton’s law of cooling.*

**Q = hA(T _{s}-T_{∞})**

_{s}‘ is the surface temperature

‘T

_{∞}‘ is the outside temperature

‘h’ is the coefficient of convection.

**Radiation:**

In radiation, heat is transferred in the form of radiant energy or wave motion from one body to another body. No medium for radiation to occur. The rate of heat radiation that can be emitted by a surface at a thermodynamic temperature is based on *Stefan-Boltzmann law*.

**Q = σ.T ^{4}**

‘σ’ is the Stefan-Boltzmann constant.

## All Comments

wow its amazing note

Nice site

how about the units each of these use?

Those notes are just great, short,straight to the point and easy to understsnd

Superb points.Very easy to manipulate…