The ease with which welding of a given material can be done without producing any defect is called Weldability. Weldability can also be defined as the capability ..
Rivet is used to connect two or more plates inserted through the hole in plates and pressed on the other side. The Unwin’s formula gives the diameter ..
A fastener is a hardware device that is used for creating non-permanent joints. Fasteners can be used to close a container of a box or an envelope, or they may involve ..
Gas Tungsten-arc Welding (GTAW) formerly known as TIG (Tungsten Inert Gas) welding, the filler metal is supplied from a filler wire as shown in the figure below. ..
