Articles related to Manufacturing topic
High-Speed Steels (HSS) are the cutting tool materials used for machining of materials. The HSS will be used for machining of materials. The General use of HSS is 18-4-1. ..
The process of welding and cutting of metals involve the application of high heat energy to the objects being welded or cut. This high amount of heat energy for welding ..
Crater Wear: The wear taking place on the rake face of a single point cutting tool like crater is called crater wear. The crater wear is mainly caused due to The presence ..
A machine tool is defined as one which while holding the cutting tools, would be able to remove metal from a workpiece in order to generate the requisite job of given ..
Some general safety precautions that are to be taken care in carpentry shop while working with carpentry tools to avoid injuries and accidents are covered in this ..
Merchant’s circle: For establishing the relationship between measurable and actual forces Merchant’s circle will be used. Assumptions made in drawing ..
A Hand power drill is a tool primarily used for making round holes or driving fasteners. It is fitted with a bit, either a drill or driver, depending on the application, ..
Chemical vapor deposition (CVD) is a thermochemical process. In a typical application, such as coating cutting tools with titanium nitride (TiN), the tools are placed ..
The failure of the tool is taking place in the following modes: 1. Failure through plastic deformation: During machining operation, when the temperature of the tip of the tool ..
Laser technology is being used for a variety of industrial applications, including heat treatment, welding, measurement, as well as scribing, cutting, and drilling ..
A more recent development in manufacturing is the concept of hybrid machining systems. Two or more machining processes are combined into one system to take advantage ..
Ultrasonic machining (USM) is a non-traditional machining process in which abrasives contained in a slurry are driven at high velocity against the work by a tool ..
There are several operations related to drilling. Some of them are: Reaming, Tapping, Counterboring, Countersinking, Center drilling, and Spot facing These are illustrated ..
Computer Integrated Manufacturing (CIM) describes the integration of Computer Aided Design (CAD) and Computer Aided Manufacturing (CAM). In the early 1960s, Ivan ..